oqmgr - old Postfix queue manager
oqmgr [generic Postfix daemon options]
The oqmgr(8) daemon awaits the arrival of incoming mail and arranges for its delivery via Postfix delivery processes. The actual mail routing strategy is delegated to the trivial-rewrite(8) daemon. This program expects to be run from the master(8) process manager.
Mail addressed to the local double-bounce address is logged and discarded. This stops potential loops caused by undeliverable bounce notifications.
oqmgr(8) daemon maintains the following queues:
Inbound mail from the network, or mail picked up by the local pickup(8) agent from the maildrop directory.
Messages that the queue manager has opened for delivery. Only a limited number of messages is allowed to enter the active queue (leaky bucket strategy, for a fixed delivery rate).
Mail that could not be delivered upon the first attempt. The queue manager implements exponential backoff by doubling the time between delivery attempts.
Unreadable or damaged queue files are moved here for inspection.
Messages that are kept "on hold" are kept here until someone sets them free.
The oqmgr(8) daemon keeps an eye on per-message delivery status reports in the following directories. Each status report file has the same name as the corresponding message file:
Per-recipient status information about why mail is bounced. These files are maintained by the bounce(8) daemon.
Per-recipient status information about why mail is delayed. These files are maintained by the defer(8) daemon.
Per-recipient status information as requested with the Postfix "sendmail -v" or "sendmail -bv" command. These files are maintained by the trace(8) daemon.
The oqmgr(8) daemon is responsible for asking the bounce(8), defer(8) or trace(8) daemons to send delivery reports.
manager implements a variety of strategies for either
opening queue files (input) or for message delivery
This strategy limits the number of messages in the active queue and prevents the queue manager from running out of memory under heavy load.
When the active queue has room, the queue manager takes one message from the incoming queue and one from the deferred queue. This prevents a large mail backlog from blocking the delivery of new mail.
This strategy eliminates "thundering herd" problems by slowly adjusting the number of parallel deliveries to the same destination.
The queue manager sorts delivery requests by destination. Round-robin selection prevents one destination from dominating deliveries to other destinations.
Mail that cannot be delivered upon the first attempt is deferred. The time interval between delivery attempts is doubled after each attempt.
destination status cache
The queue manager avoids unnecessary delivery attempts by maintaining a short-term, in-memory list of unreachable destinations.
On an idle
system, the queue manager waits for the arrival of trigger
events, or it waits for a timer to go off. A trigger is a
one-byte message. Depending on the message received, the
queue manager performs one of the following actions (the
message is followed by the symbolic constant used internally
by the software):
Start a deferred queue scan. If a deferred queue scan is already in progress, that scan will be restarted as soon as it finishes.
Start an incoming queue scan. If an incoming queue scan is already in progress, that scan will be restarted as soon as it finishes.
Ignore deferred queue file time stamps. The request affects the next deferred queue scan.
Purge all information about dead transports and destinations.
Wakeup call, This is used by the master server to instantiate servers that should not go away forever. The action is to start an incoming queue scan.
The oqmgr(8) daemon reads an entire buffer worth of triggers. Multiple identical trigger requests are collapsed into one, and trigger requests are sorted so that A and F precede D and I. Thus, in order to force a deferred queue run, one would request A F D; in order to notify the queue manager of the arrival of new mail one would request I.
(Enhanced status codes)
RFC 3464 (Delivery status notifications)
The oqmgr(8) daemon is not security sensitive. It reads single-character messages from untrusted local users, and thus may be susceptible to denial of service attacks. The oqmgr(8) daemon does not talk to the outside world, and it can be run at fixed low privilege in a chrooted environment.
Problems and transactions are logged to the syslog(8) daemon. Corrupted message files are saved to the corrupt queue for further inspection.
Depending on the setting of the notify_classes parameter, the postmaster is notified of bounces and of other trouble.
A single queue manager process has to compete for disk access with multiple front-end processes such as cleanup(8). A sudden burst of inbound mail can negatively impact outbound delivery rates.
Changes to main.cf are not picked up automatically, as oqmgr(8) is a persistent process. Use the command "postfix reload" after a configuration change.
The text below provides only a parameter summary. See postconf(5) for more details including examples.
In the text below, transport is the first field in a master.cf entry.
before Postfix version 2.5:
Allow a sender or recipient address to have ’-’ as the first character.
Postfix version 2.7 and later:
When a content_filter or FILTER request specifies no explicit next-hop destination, use $default_filter_nexthop instead; when that value is empty, use the domain in the recipient address.
The minimal delay between warnings that a specific destination is clogging up the Postfix active queue.
The maximal number of messages in the active queue.
The maximal number of recipients held in memory by the Postfix queue manager, and the maximal size of the short-term, in-memory "dead" destination status cache.
Obsolete feature: the percentage of delivery resources that a busy mail system will use up for delivery of a large mailing list message.
The initial per-destination concurrency level for parallel delivery to the same destination.
The default maximal number of parallel deliveries to the same destination.
A transport-specific override for the default_destination_concurrency_limit parameter value, where transport is the master.cf name of the message delivery transport.
Postfix version 2.5 and later:
A transport-specific override for the initial_destination_concurrency parameter value, where transport is the master.cf name of the message delivery transport.
How many pseudo-cohorts must suffer connection or handshake failure before a specific destination is considered unavailable (and further delivery is suspended).
A transport-specific override for the default_destination_concurrency_failed_cohort_limit parameter value, where transport is the master.cf name of the message delivery transport.
The per-destination amount of delivery concurrency negative feedback, after a delivery completes with a connection or handshake failure.
A transport-specific override for the default_destination_concurrency_negative_feedback parameter value, where transport is the master.cf name of the message delivery transport.
The per-destination amount of delivery concurrency positive feedback, after a delivery completes without connection or handshake failure.
A transport-specific override for the default_destination_concurrency_positive_feedback parameter value, where transport is the master.cf name of the message delivery transport.
Make the queue manager’s feedback algorithm verbose for performance analysis purposes.
The default maximal number of recipients per message delivery.
A transport-specific override for the default_destination_recipient_limit parameter value, where transport is the master.cf name of the message delivery transport.
The minimal time between attempts to deliver a deferred message; prior to Postfix 2.4 the default value was 1000s.
The maximal time between attempts to deliver a deferred message.
Consider a message as undeliverable, when delivery fails with a temporary error, and the time in the queue has reached the maximal_queue_lifetime limit.
The time between deferred queue scans by the queue manager; prior to Postfix 2.4 the default value was 1000s.
The time between attempts by the Postfix queue manager to contact a malfunctioning message delivery transport.
Postfix version 2.1 and later:
Consider a bounce message as undeliverable, when delivery fails with a temporary error, and the time in the queue has reached the bounce_queue_lifetime limit.
Postfix version 2.5 and later:
The default amount of delay that is inserted between individual deliveries to the same destination; the resulting behavior depends on the value of the corresponding per-destination recipient limit.
A transport-specific override for the default_destination_rate_delay parameter value, where transport is the master.cf name of the message delivery transport.
Postfix version 3.1 and later:
The default amount of delay that is inserted between individual deliveries over the same message delivery transport, regardless of destination.
A transport-specific override for the default_transport_rate_delay parameter value, where the initial transport in the parameter name is the master.cf name of the message delivery transport.
How much time a Postfix queue manager process may take to handle a request before it is terminated by a built-in watchdog timer.
The time limit for the queue manager to send or receive information over an internal communication channel.
Postfix version 3.1 and later:
address_verify_pending_request_limit (see ’postconf -d’ output)
A safety limit that prevents address verification requests from overwhelming the Postfix queue.
config_directory (see ’postconf -d’ output)
The default location of the Postfix main.cf and master.cf configuration files.
The names of message delivery transports that should not deliver mail unless someone issues "sendmail -q" or equivalent.
The maximal number of digits after the decimal point when logging sub-second delay values.
Log warnings about problematic configuration settings, and provide helpful suggestions.
The process ID of a Postfix command or daemon process.
The process name of a Postfix command or daemon process.
queue_directory (see ’postconf -d’ output)
The location of the Postfix top-level queue directory.
The syslog facility of Postfix logging.
syslog_name (see ’postconf -d’ output)
A prefix that is prepended to the process name in syslog records, so that, for example, "smtpd" becomes "prefix/smtpd".
Postfix version 3.0 and later:
After sending a "your message is delayed" notification, inform the sender when the delay clears up.
Postfix 3.3 and later:
The master.cf service name of a Postfix daemon process.
/var/spool/postfix/active, active queue
/var/spool/postfix/deferred, deferred queue
/var/spool/postfix/bounce, non-delivery status
/var/spool/postfix/defer, non-delivery status
/var/spool/postfix/trace, delivery status
bounce(8), delivery status reports
postconf(5), configuration parameters
master(5), generic daemon options
master(8), process manager
syslogd(8), system logging
"postconf readme_directory" or
"postconf html_directory" to locate this
QSHAPE_README, Postfix queue analysis
The Secure Mailer license must be distributed with this software.
IBM T.J. Watson Research
P.O. Box 704
Yorktown Heights, NY 10598, USA
111 8th Avenue
New York, NY 10011, USA